homemade waterfall w/3500 GPH pump and 500 gal pond
Posted by Pond Keeper
Finished waterfall and koi pond all plants and rocks are finally DONE. Equpment used is talked about and explained some.
Duration : 0:7:5
Shubunkins at play in their 35-gallon preformed pond.
Posted by Pond Keeper
Our two shubunkins swimming in their new 35-gallon preformed pond.
Duration : 0:1:37
Goldfish Pond
Posted by Pond Keeper
http://www.nitasnest.homestead.com This is a 90 gallon pre-formed pond with 9 or 10 fish. They winter in the house and go out in the spring. Works out well and I love the sound of the splashing water.
Duration : 0:0:21
How to build a garden fish pond
Posted by Pond Keeper
How to build a garden pond
These pictures are the steps I took when building my pond in my garden. The old small pond was having serious algae issues, so I decided to go big on proper filtration.
The Filter I ended up with was a 11000 litre/hour Bio mechanical pressurized unit with built in UV clarifier, I also bought a 5000 litre/hour pump with all the spare capacity I made the decision to dig out and extend my Pond and also add a waterfall and fountain.
The original pond was raised and formed a bit of a sitting area so the route for me was to continue this theme all the way round.
Once all the digging and shaping was complete a concrete foundation was poured into the shuttering that was supported by the bricks. Once the concrete was set, it was time to get the trowel out and the trusty spirit level and the brickwork was completed using a mix of 4 to 1 (sand to cement).
The underlay is one of the most important things to consider, it is the done thing to get hold of some old carpet, this is both very strong and very tough and is ideal. I went to a carpet shop and asked what they did with the carpets that they remove when laying new ones they told me to help myself to whats in their skip….yay!!!….result.
So with the entire pond now trimmed with carpet its time to install the liner.
Best tip here is to take your time, and slowly fill with water, gently pulling away any crease. That done, its now just a simple matter of completing the brickwork and cutting and cementing down the toppings.
A good clean down and with the pump and filters working all will be good.
finally I can actually see my fish.
The whole project was completed in one week and my pond now measures 4.5 metres by 2.5 metres and can be filled to a depth of 800mm.
The fountain is presently fitted with a Mushroom head, and the waterfall was custom made and make a really great sound. BLISS….haha
Duration : 0:2:40
Contents include:
